Determination of endocrine-disrupting compounds in environmental samples using gas and liquid chromatography with mass spectrometry

This paper describes certain applications for endocrine-disrupting compounds determination. LC-MS was applied using an electrospray ionization (ESI) technique in positive mode for alcohol polyethoxylates and nonylphenol and octylphenol polyethoxylates (NPEOn and OPEOn), and in negative mode for 4-nonylphenol (4-NP) and 4-octylphenol (4-OP) to determine targeted compounds in wastewater and sludge. GC-MS and GC-MS-MS were used to determine 4-NP, 4-tert.-octylphenol (4-t-OP), bisphenol A, estradiol-17beta, estriol estrone, testosterone, 17alpha-ethynylestradioL cholesterol, coprostan-3-ol, coprostan and coprostan-3-one in both surface water and wastewater after derivatization with N,O-bis(trimethyl-silyl)trifluoroacetamide (BSTFA). Extraction from the water samples was by an SPE technique, using either a copolymeric (Oasis HLB) or C18 silica sorbents, depending on the target contaminants. Extraction from the sludge samples was by a Soxtec system using methanol. Percentage recoveries for most of the selected compounds, using either a copolymeric (Oasis HLB) or C18 silica sorbents, were satisfactory (>60%). Quantification limits for the target compounds were at ppb levels in both water and sludge samples when using LC-ESI-MS in both positive and negative modes. They reached ppt levels in water when using GC-MS (in large volume injection mode) and GC-MS-MS. The results revealed 4-NP, NPEOn and AEOs in sludge samples at a concentration range of 1.3-8.5 microg/g, and NPEOn, OPEOn and other compounds, such as coprostan and bisphenol A, in surface water and/or wastewater samples at concentrations ranging from the ppt to ppb levels.     

Autonomous Forms and Exact Solutions of Equations of Motion of Polytropic Gas

The system of motion of a polytropic gas can be reduced to an autonomous form by using group analysis. A new family of exact solutions are constructed.     

Modeling of Slurry Polymerization of Ethylene Using a Soluble Cp2ZrCl2/MAO Catalytic System

The slurry homopolymerization of ethylene catalyzed by a Cp₂ZrCl₂/MAO catalytic system was studied. A simple kinetic model including initiation, propagation, transfer to monomer and cocatalyst, spontaneous transfer and spontaneous deactivation was developed to predict dynamic yield of polymerization and molecular weight of final products. Kinetic constants were estimated by numerical solution of polymerization kinetic model, combined with Nelder‐Mead simplex method. The model predicts that the propagation reaction has the lower activation energy in relation to chain transfer reactions which leads to decrease of molecular weight at elevated temperatures. The initiation reaction has however, the highest activation energy that results in raising the peak of reaction rate at higher temperatures.

     

Convective heat transfer over two blocks arbitrary located in a 2D plane channel using a hybrid lattice Boltzmann-finite difference method

The present paper deals with the numerical investigation of a 2D laminar fluid flow and heat transfer in a plane channel with two square blocks located at arbitrary positions. The numerical model is based on a coupling between the multiple relaxation time-lattice Boltzmann equation and the finite difference method for incompressible flow. Both the horizontal and the vertical separation distances between the two blocks are varied. Particular attention was paid to the distribution patterns of the time averaged local Nusselt number on the top and bottom walls. Results obtained from the present study show a complex flow patterns developed in the channel due to the change of the square blocks positions.     

Magnetic Solid-Phase Extraction of Lawsone Using Polyphenol-Coated Magnetic Nanoparticles: Synthesis,Characterization and examination

Chromatographia - A novel polyphenol-coated CoFe2O4 system with sorption capacity of lawsone was synthesized as a magnetic sorbent by chemical oxidative polymerization process for magnetic...     

Simultaneous Filtration and Solid-Phase Extraction Combined with Large-Volume Injection in GC/MS for Ultra-Trace Analysis of Polar Pesticides in Surface Water

A method combining simultaneous filtration and solid-phase extraction (SPE) with large-volume injection (LVI) in gas chromatography/mass spectrometry (GC/MS) was developed to determine 13 polar pesticides in surface water. The selected pesticides - 4 organophosphorus, 7 organonitrogens and 2 triazine degradation products - were extracted from 0.5-L samples of filtered and raw water using cartridges filled with a silica-bonded material (1 g of ISOLUTE triazine, C-18) and a depth filter. No obstruction was observed during the extraction of raw water drawn from the St. Lawrence River (concentration of suspended particulate matter (SPM) ranging from 2 to 58 mg L^?1). Overall percent recoveries were satisfactory for all the target pesticides (>60%) except desisopropyl-atrazine (more polar), which varied from 29 to 46% according to sample pH. The coefficient of variation was below 10% for the majority of the target pesticides and detection limits ranged from 0.1 to 0.8 ng L^?1. Applied to real samples drawn from the St. Lawrence River, this method allowed for the detection of atrazine, cyanazine, desethyl-atrazine (DEA), desisopropyl-atrazine (DIA), metolachlor and simazine, at concentrations of 6 to 91 ng L^?1. Using atrazine and metolachlor as examples, the correlation between filtered and raw water samples was more significant for the former (r = 0.87) than for the latter (r = 0.67). Temporal variations in atrazine and metolachlor in filtered water drawn from the St. Lawrence River, for example, were similar whether using the established method, based on liquid-liquid large-volume extraction (LVE) combined with GC/NPD analysis, or the one proposed herein. The latter method, however, systematically found atrazine concentrations 62% higher than those obtained by the older one, applied to the same field samples. Thus, the switch to the new analytical method will require the application of a correction factor to the atrazine concentration time series acquired with the previously used method.     

Interaction study of acetylcholinestrase inhibitors on pharmacokinetics of memantine in rat plasma by HPLC‐fluorescence method

The present study aims to investigate the possibility of interaction of donepezil (DP) and galantamine (GAL) as acetylcholinestrase inhibitors, on memantine (MT) hydrochloride in rat plasma by HPLC‐fluorescence detection. The separation of MT was achieved within 12 min without interference of DP and GAL on the chromatogram. MT levels in rat plasma with a single administration of MT (2.5 mg/kg, i.p.) and those with a co‐administration of DP (5.0 mg/kg, i.p.) and GAL (3 mg/kg, i.p.) were monitored. MT concentrations determined in rat plasma ranged from 10.0 to 245.6 ng/mL. Significant difference was observed in the behavior of MT with a co‐administration of DP, while no significant difference was observed with a co‐administration of GAL. Copyright © 2013 John Wiley & Sons, Ltd.     

Electrospun nanofibers of ZnO‐TiO2 hybrid: characterization and potential as an extracellular scaffold for supporting myoblasts

One‐dimensional nanofibers have attracted tremendous attention because of their potential applications. Electrospinning technology enables industrial production of these nanofibers. This study aims to fabricate one‐dimensional ZnO doped TiO₂ by electrospinning and to characterize these hybrid nanofibers. The nanocomposite was prepared using colloidal gel composed of zinc nitrate, titanium isopropoxide and polyvinyl acetate. X‐ray diffraction, energy dispersive x‐ray analysis and transmission electron microscopy analysis confirmed the purity and crystalline nature of this material, whereas the diameter of these nanofibres estimated from scanning electron microscope (SEM), field emission SEM and transmission electron microscopy are between 200 and 300 nm. Cell counting with Kit‐8 assay at regular time intervals and phase‐contrast microscopy data revealed that C2C12 cells proliferated well on ZnO/TiO₂ nanofibers between 1 and 10 µg/ml, and cellular attachments are visible by SEM. The nanostructured ZnO/TiO₂ hybrid nanofibers show higher cell adhesion, proliferation and spreading behavior compared with the titanium substrate and control. Our study suggests that ZnO/TiO₂ nanofibers could potentially be used in tissue engineering applications. The scalability, low cost, reproducibility and high‐throughput capability of this technology is potentially beneficial to examine and optimizing a wide array of cell‐nanofiber systems prior to in vivo experiments. Copyright © 2013 John Wiley & Sons, Ltd.